Before You Begin
You need Admin access with the appropriate certification permissions.
Make sure your organization's structure and roles are configured before assigning certification requirements.
Decide whether certificates should be approved automatically or reviewed by designated approvers.
Overview
The Certifications feature helps you manage the professional and learning certificates required across your organization. With it, you can:
Create professional certificates or link learning certificates to courses and pathways.
Define which employees must hold each certificate.
Configure submission and approval requirements.
Approve or reject submitted certificates.
Monitor compliance and identify missing or expired certificates.
The process has five stages:
Define: An Admin creates a certification and assigns it to the required employees.
Submit: Employees provide their certificate details and supporting documents.
Verify: The submission is approved automatically or reviewed through the configured approval flow.
Track: Approved certificates count toward compliance.
Renew: When a certificate expires, the employee renews it to restore compliance.
Accessing Certifications
From the side navigation, select Capabilities.
Select Framework.
Select the Certifications tab, next to Competencies.
The page has two tabs:
Added Certificates: The certifications created for your organization. Each card shows the certificate name, provider, employee counts, and Compliance Rate.
Pending Submissions: Submissions awaiting approval. A badge shows how many are pending.
Use Search by certificate name, Filters, and Reset to find certifications.
Additional Actions
Select the arrow next to New Certificate to access:
Configurations: Set attachment requirements and approval workflows.
Bulk Upload: Upload multiple certificates.
Export: Export certification data.
Step 1: Configure Certificate Approvals
Before creating certifications, configure how employee submissions are approved.
On the Certifications page, select the arrow next to New Certificate, then select Configurations.
In the Capabilities Configurations panel, set Make Attachment Requirement. When it's on, employees must attach a file when they submit a certificate. When it's off, an attachment is optional.
Under Approval Flow, choose one option:
Auto-approve: Certificates are approved automatically on submission, with no manual review.
Approval steps: Certificates must pass through the reviewers you choose before they're approved.
Set Up Approval Steps
If you choose Approval steps:
Select Approval steps.
For the first step, choose the reviewer:
Admin: An administrator reviews the submission.
Manager: The employee's line manager reviews it.
Specific Approver: Select a designated person from the list.
Select Add approval step to add another reviewer. Repeat as needed. To remove a step, select the X beside it.
Approval steps are completed in the order you set.
Once you have configured the attachment requirements and approval flow, select Save Changes to apply your settings.
💡 Tip: Use a single Admin step when HR needs to verify certificates directly. For an extra review layer, make the employee's Manager the first approver and an Admin the next.
Step 2: Add a New Certification
Open Capabilities > Framework > Certifications.
Select New Certificate.
In Adding New Certificate, under Certificate Type, select Professional Certificate or Learning Certificate.
The fields shown depend on the type you select.
Add a Professional Certificate
Use this for external qualifications, such as PMP or AWS Solutions Architect.
Enter the Certificate Name.
Select the Provider.
Optionally, enter a Reference / Course Link.
Continue to Required for to assign the certification.
Add a Learning Certificate
Use this for certifications earned by completing a course or pathway in Lumofy.
Select a Course or Pathway
Under Course or Pathway, search for the learning content and select it from the results.
Review the Certificate Name. It fills in automatically from the course, and you can edit it.
To pick different content, select Change.
Set the Validity
Under Validity, choose:
Doesn't Expire: The certificate has no expiration date.
Expires After a Set Period: The certificate expires after a duration you set.
If you choose Expires After a Set Period:
Enter the duration and select Months or Years.
Under When does it start counting?, choose:
Each talent's completion date: Validity starts when each employee completes the course.
A fixed start date: Validity starts on one date you select, for all applicable employees.
Set Automatic Re-enrolment
Turn on Re-enrol talent when the certificate expires to assign the course to employees again when their certification expires, so they can renew.
Handle Previous Completions
Under Talent Who Already Completed This Course, Lumofy shows how many applicable employees finished the course before the certification existed. Choose:
Count Their Past Completion: Their earlier completion counts toward the certification.
Re-enrol Them to Retake It: They're enrolled in the course again.
Assign Who Needs the Certification
Before adding a certificate, you must define which employees are required to hold it. This applies to both Professional Certificate and Learning Certificate.
Under Required for, choose:
Entire Organization: All employees.
Specific units or roles: Only the units or roles you select.
To assign specific units or roles:
Select Specific units or roles.
Browse the hierarchy (Legal Entities, Divisions, Departments, and Roles), or use the level tabs and search to find a role.
Select the units or roles you need. Use Expand all or Collapse all to navigate, and check the counter for the number of levels selected.
Select Add Certificate.
📝 Note: Compliance is calculated against the employees in the certification's assigned scope.
Step 3: Review Certificate Submissions
When an employee submits a certificate that requires approval, it follows the approval flow configured in Step 1. If multiple approval steps are configured, the submission must pass through the designated reviewers in sequence.
Submissions awaiting review appear under Pending Submissions.
Submission Notifications
Reviewers are notified in two ways:
Email: Names the employee and the submitted certificates, with a View Submitted Certificates button.
In-app notification: Alerts the reviewer, with a Review certificate button.
Open a Submission
Go to Capabilities > Framework > Certifications, then select Pending Submissions.
Find the submission. The list shows Talent, Certificate, Line Manager, and Details. Use search or Filters to narrow it down.
Select the arrow under Details to open Certificate Submissions Review.
Review the Details
Check the employee's name, role, and department, then the certificate name, ID, and URL, the issue, expiry, and submission dates, and any attachments (you can download them).
The Evidence strength score summarizes the checks run against the submitted evidence. Review its notes before you decide.
Approve or Reject
Approve: If the certificate meets the criteria, select Approve. Once fully approved, it counts toward the employee's compliance.
Reject: If the information is incomplete, incorrect, or can't be verified, select Reject, enter a Reason for rejection, then select Confirm Rejection. The reason is shared with the employee so they can correct the submission and submit again.
📝 Note: Keep rejection reasons specific and actionable. For example: "The certificate ID doesn't match the provider's record. Please upload the official certificate with the correct ID."
Step 4: Track Certification Compliance
View Certification Details
Open Capabilities > Framework > Certifications.
Under Added Certificates, find the certification and select View Details.
The page shows the certificate name, provider, and Reference link, with Edit and Delete buttons to manage the certification. It also includes:
Expiring Certificates: A chart of certificates expiring in 90 days, expiring in 30 days, and expired. Use it to spot certificates that need renewal.
Overall Fulfillment: The share of applicable employees who meet the requirement. For example, 58/120 means 58 of 120 employees are compliant.
Talents Compliance: A table with Talent, Compliance, Expiry Date, Status, and Export. Search for an employee or use Filters, and select Download certificates to download an employee's certificates.
Use Certificates Analysis
For an organization-wide view, open Capabilities, then select Certificates Analysis.
Expiring Certificates: A summary chart. Select View Details to see each employee, certificate name, expiry date, and status. You can search the list or select Export.
Overall Fulfillment: The overall compliance percentage.
Talents Compliance: For each employee, the required, fulfilled, and missing certificates and the compliance percentage. Search or select Export.
Role Compliance: For each role, Talents, Required Certs, Fulfilled, Missing, and Compliance. Select the arrow under Details to see the employees in a role, or select Export to download the table.
FAQs
Where can I change the certificate approval flow?
Where can I change the certificate approval flow?
Open Capabilities > Framework > Certifications. Select the arrow next to New Certificate, then choose Configurations.
How can I find employees whose certificates are about to expire?
How can I find employees whose certificates are about to expire?
Open Certificates Analysis and select View Details under Expiring Certificates.
You can also open an individual certification through View Details and review the Talents Compliance table.
Can different certificates have different required employee groups?
Can different certificates have different required employee groups?
Yes. When creating a certificate, use Required for to assign it to the Entire Organization or to Specific units or roles.
Can I require multiple approval steps?
Can I require multiple approval steps?
Yes. Under Configurations > Approval Flow, select Approval steps and use Add approval step to configure additional reviewers.
Can I add multiple certifications at once?
Can I add multiple certifications at once?
Yes. On the Certifications page, select the arrow next to New Certificate, then choose Bulk Upload.













